TM 5-3895-379-23-2
0250
LOW VIBRATORY FREQUENCY ADJUSTMENT
1.
If frequency is not in range, vibratory pump must be adjusted. Adjust as follows:
2.
Loosen locknut (Figure 2, Item 1) on the adjustment screw (Figure 2, Item 2).
3.
To increase vibrations per minute, turn adjustment screw (Figure 2, Item 2) counterclockwise. To decrease,
turn adjustment screw (Figure 2, Item 2) clockwise.
1, 2
M1148SWR
Figure 2. Hydraulic Vibratory Adjustment.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00188)