TM 5-3895-379-23-2
0249
DATA PLATE REMOVAL
WARNING
Wear eye protection when drilling out rivets. Failure to do so could result in injury.
CAUTION
Avoid using a twist drill with an excessively large diameter when drilling out rivets. Failure to
follow this caution could result in enlarged holes in roller, too large for rivet size needed.
1.
Drill out four rivets (Figure 1, Item 1) from data plate (Figure 1, Item 2). Discard rivets.
2.
Remove data plate (Figure 1, Item 2) from roller.
1
2
M0813SWR
Figure 1. Data Plate Removal.
END OF TASK
DATA PLATE INSTALLATION
1.
Position data plate (Figure 2, Item 2) to existing holes in roller.
2.
Install data plate (Figure 2, Item 2) with four new rivets (Figure 2, Item 1).
03/15/2011Rel(1.8)root(maintwp)wpno(M00187)