TM 5-3895-379-23-2
FIELD MAINTENANCE
ROTATE LOCK REPLACEMENT
INITIAL SETUP:
References
Tools and Special Tools
TM 5-3895-379-23P, Figure 104
Tool Kit, General Mechanic's: Automotive
(WP 0289, Table 1, Item 39)
Wrench, Torque, 20-100 ft-lb
Equipment Condition
(WP 0289, Table 1, Item 42)
Engine off. (TM 5-3895-379-10)
Drums chocked. (TM 5-3895-379-10)
Personnel Required
Construction Equipment Repairer 91L
REMOVAL
1.
Remove four screws (Figure 1, Item 7), washers (Figure 1, Item 6), and rotate lock assembly
(Figure 1, Item 5) from operator station (Figure 1, Item 1).
2.
Remove spring pin (Figure 1, Item 2), washer (Figure 1, Item 9), pin (Figure 1, Item 3), and spring
(Figure 1, Item 8) from rotate lock assembly plate (Figure 1, Item 5).
3.
Remove two bearings (Figure 1, Item 4) from rotate lock assembly plate (Figure 1, Item 5).
1
2
3
5
4
8
6
9
7
4
10
M0766SWR
Figure 1.
Rotate Lock Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00175)
