TM 5-3895-379-23-1
0218
MANUAL BRAKE RELEASE PUMP TO HYDRAULIC LINE REPLACEMENT
NOTE
Use drain pan to catch any hydraulic oil that may drain from system. Dispose of oil IAW local
policy and ordinances. Ensure all spills are cleaned up.
1.
Place container under manual brake release pump elbow (Figure 2, Item 5).
2.
Remove hose (Figure 2, Item 1) and O-ring (Figure 2, Item 4) from manual brake release pump elbow
(Figure 2, Item 5) and allow oil to drain into container. Discard O-ring.
3.
Remove hose (Figure 2, Item 1) and preformed packing (Figure 2, Item 2) from tee (Figure 2, Item 3). Discard
preformed packing.
4.
Install new preformed packing (Figure 2, Item 2) and hose (Figure 2, Item 1) on tee (Figure 2, Item 3).
5.
Install new O-ring (Figure 2, Item 4) and hose (Figure 2, Item 1) on manual brake release pump elbow
(Figure 2, Item 5).
12
3
4
5
M0416SWR
Figure 2. Brake Hoses, Lines, and Fittings Replacement.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00156)