TM 5-3895-379-23-1
0218
MANUAL BRAKE RELEASE PUMP TO BRAKE VALVE LINE REPLACEMENT - Continued
4.
Remove hose (Figure 5, Item 3) and O-ring (Figure 5, Item 2) from manual brake release pump elbow
(Figure 5, Item 1). Discard O-ring.
5.
Install new O-ring (Figure 5, Item 2) and hose (Figure 5, Item 3) on manual brake release pump elbow
(Figure 5, Item 1).
1
3
2
M0419SWR
Figure 5. Brake Hoses, Lines, and Fittings Replacement.
6.
Place hose (Figure 4, Item 2) in clamp (Figure 4, Item 4) and install clamp and plate (Figure 4, Item 5) on two
screws (Figure 4, Item 3) with two screws (Figure 4, Item 1).
7.
Install new O-ring (Figure 6, Item 2) and hose (Figure 6, Item 3) on brake valve tee (Figure 6, Item 1).
1
2
3
M0420SWR
Figure 6. Brake Hoses, Lines, and Fittings Replacement.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00156)
