TM 5-3895-379-23-1
0184
INSTALLATION
1.
Install spacer (Figure 2, Item 8) and vibration sensor (Figure 2, Item 7) in plate (Figure 2, Item 1). Do not tighten
nut (Figure 2, Item 6).
2.
Install vibration motor hydraulic line (Figure 2, Item 4) on elbow (Figure 2, Item 5).
3.
Connect connector (Figure 2, Item 2) to vibratory sensor connector (Figure 2, Item 3).
1
2
8
7
6
3
4
5
M1309SWR
Figure 2. Vibration Sensor Installation.
4.
Adjust sensor. Refer to ADJUSTMENT in this work package.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00122)
