TM 5-3895-379-23-1
0162
INSTALLATION
NOTE
Post on light switch is positioned in notch of panel assembly to properly align light switch on
panel assembly.
1.
Install light switch (Figure 3, Item 6) on panel assembly (Figure 3, Item 4) with new lockwasher
(Figure 3, Item 5) and nut (Figure 3, Item 3). Tighten nut.
NOTE
Knob indicator is positioned on switch to point at lights selection icons. To find correct position,
turn switch to full-right position and position indicator to point toward icon furthest to the right.
2.
Install knob (Figure 3, Item 2) on light switch (Figure 3, Item 6) with screw (Figure 3, Item 1). Tighten screw.
3.
Install three wires (Figure 3, Item 7) on light switch (Figure 3, Item 6) and tighten three screws
(Figure 3, Item 8).
4.
Install wire (Figure 3, Item 9) on light switch (Figure 3, Item 6) with screw (Figure 3, Item 10) and new lockwasher
(Figure 3, Item 11).
1
2
3
4
5
6
7
8
9
11
10
VIEW FROM DRIVER'S SEAT
M1250SWR
Figure 3. Work Light Control Switch Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00100)