TM 5-3895-379-23-1
0141
REMOVAL
1.
Loosen clamp (Figure 1, Item 3) and remove radiator hose (Figure 1, Item 2) from connector
(Figure 1, Item 1).
2.
Remove four screws (Figure 1, Item 4) and connector (Figure 1, Item 1) from thermostat housing
(Figure 1, Item 5).
3.
Remove thermostat (Figure 1, Item 7), ring (Figure 1, Item 6), seal (Figure 1, Item 9), and O-ring
(Figure 1, Item 8) from thermostat housing (Figure 1, Item 5). Discard ring, seal, and O-ring.
1
2
3
4
9
8
7
6
5
M0625SWR
Figure 1. Thermostat Removal.
END OF TASK
TESTING
1.
Hang thermostat in pan of water so that thermostat is completely under water. Do not allow thermostat to make
contact with pan.
2.
Place thermal digital resistor (thermometer) in water.
3.
Heat water with propane torch and stir to allow for consistent temperature.
03/15/2011Rel(1.8)root(maintwp)wpno(M00079)
