TM 5-3895-379-23-1
0140
INSTALLATION
NOTE
Thermostat is replaced as a kit with preformed packing.
1.
Position thermostat (Figure 2, Item 8) and new preformed packing (Figure 2, Item 7) in thermostat housing
(Figure 2, Item 6).
2.
Install connector (Figure 2, Item 9) on thermostat housing (Figure 2, Item 6) with four screws
(Figure 2, Item 2) and bolts (Figure 2, Items 1 and 5). Tighten screws to 25-41 lb-ft (34-56 Nm).
3.
Install radiator hose (Figure 2, Item 3) on connector (Figure 2, Item 9) and tighten clamp (Figure 2, Item 4).
2
1
3
4
9
5
8
7
6
M0624SWR
Figure 2.
Thermostat Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Fill cooling system. (WP 0139)
2.
Lower operator platform assembly. (Volume 2, WP 0235)
3.
Start engine and allow engine to idle until coolant reaches normal operating temperature. Run engine five
minutes. Check for leaks. (TM 5-3895-379-10)
4.
Turn engine off. (TM 5-3895-379-10)
END OF TASK
END OF WORK PACKAGE
0140-3/4 blank
03/15/2011Rel(1.8)root(maintwp)wpno(M00078)