TM 5-3895-379-23-1
0139
FILL
CAUTION
Do not fill coolant system with water only. Use a 50/50 mixture of ethylene glycol (antifreeze)
and water. Failure to do so will result in damage to engine.
1.
Pull lever (Figure 4, Item 3) and open access door (Figure 4, Item 1). Release lever.
2.
Remove radiator cap (Figure 4, Item 2) from radiator (Figure 4, Item 4) and fill radiator with a 50/50 mixture of
water and antifreeze. The radiator is full when coolant level is 3 inches below top of fill hose.
3.
Check radiator cap (Figure 4, Item 2) for missing or damaged gasket. Replace cap if gasket is damaged or
missing.
4.
Install radiator cap (Figure 4, Item 2) on radiator (Figure 4, Item 4), pull lever (Figure 4, Item 1) and close access
door (Figure 4, Item 1). Release lever.
1
2
4
3
M0622SWR
Figure 4. Coolant System Fill.
5.
Start engine (TM 5-3895-379-10) and allow engine to idle until coolant reaches normal operating temperature.
Run engine five minutes. Check for leaks.
6.
Turn engine off (TM 5-3895-379-10).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Close right-side door assembly. (TM 5-3895-379-10)
2.
Remove chocks. (TM 5-3895-379-10)
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00077)