TM 5-3895-379-23-1
0096
INSTALLATION - Continued
15.
Place clamp (Figure 7, Item 1) on hose (Figure 7, Item 3).
16.
Install clamp (Figure 7, Item 1) and hose (Figure 7, Item 3) on bracket (Figure 7, Item 4) with screw
(Figure 7, Item 2). Tighten screw to 15-25 lb-ft (20-34 Nm).
1
2
4
3
M0104SWR
Figure 7. Engine Oil Cooler Lines and Fittings Installation.
17.
Install adapter (Figure 8, Item 2) on connector (Figure 8, Item 1).
18.
Place nut (Figure 8, Item 4) and compression sleeve (Figure 8, Item 3) on hose (Figure 8, Item 5).
19.
Install hose (Figure 8, Item 5) on adapter (Figure 8, Item 2) and tighten nut (Figure 8, Item 4).
1
2
3
4
5
M0105SWR
Figure 8. Engine Oil Cooler Lines and Fittings Installation.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00035)