TM 5-3895-379-10
DRAINING AND FILLING FUEL AND HYDRAULIC OIL TANKS
THIS WORK PACKAGE COVERS
Drain Fuel Tank, Drain Hydraulic Oil Tank, Cleaning and Inspection, Fill Fuel Tank, Fill Hydraulic Oil Tank
INITIAL SETUP
References
Tools and Special Tools
Wrench, box and open end, combination (Item 5,
Checks and Services (PMCS) Introduction
Materials/Parts
Equipment Condition
Oil, lubricating (Item 10 or 13, WP 0029 00)
Engine off (WP 0005 00)
Rag, wiping (Item 16, WP 0029 00)
Roller parked on level ground (WP 0005 00)
Fuel (Item 6, 7 or 8, WP 0029 00)
Drums chocked (WP 0005 00)
Packing, preformed (2)
Left-side door assembly opened (hydraulic oil tank)
Container, 55 gal. minimum capacity (fuel tank)
Container, 15.5 gal. minimum capacity (CB534B
Roller) or 24 gal. minimum capacity (CB534C
Right-side door assembly opened (fuel tank) (WP
Roller)
DRAIN FUEL TANK
WARNING
DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Fuel may ignite, causing injury, death or damage to roller.
Wear fuel-resistant gloves when handling fuels and promptly wash exposed skin and change fuel-
soaked clothing.
Place portable fire extinguisher within reach prior to draining fuel tank.
Fuel is very slippery. To avoid injury, wipe up spilled fuel with rags. Before starting roller, check that no
fuel is spilled on or around machine.
NOTE
Dispose of fuel IAW local policy and ordinances.
Fuel tank capacity is 55 gal. (208 l).
