TM 5-3895-379-10
ENGINE COOLANT CHECK AND SERVICE
0017 00
CHECK AND FILL
1.
Pull lever (1) and open access door (2). Release lever.
2.
Remove radiator cap (3) by turning left slowly to relieve coolant system pressure.
3.
Check coolant level. Coolant level should be approximately 3 in. (7.6 cm) below fill port.
CAUTION
Do not fill coolant system with water only. Use ethylene glycol mixture (antifreeze) with water. Failure to do
so will result in damage to engine.
4.
If necessary, fill radiator (4) with a 50/50 mixture of water/antifreeze to approximately 3 in. (7.6 cm) below fill port.
5.
Install radiator cap (3) on radiator (4) by turning cap to full right.
6.
Pull lever (1) and close access door (2).
2
4
3
1
7.
Release lever to lock access door in position.
8.
Close right-side door assembly (WP 0005 00).
9.
Remove chocks (WP 0005 00).
END OF WORK PACKAGE
0017 00-2
