TM 5-3895-346-14
HYDROSTATIC SYSTEM
PUMP REPAIR
Figure 23.
Figure 24.
Remove the locking retainers using a 12-point, 3/16 socket for the capscrews (refer to Fig. 24).
Figure 25.
Figure 26.
After removing the retainers, scribe a line to mark the height of the servo housing in relation to the pump
housing (refer to Fig. 25).
Unscrew the servo housings using channel-lock pliers to grip the flats on top of the housings (refer to Fig. 26
and 27).
Figure 27.
Figure 28.
At this time the servo springs should be removed if replacement is necessary, as the pump housing will provide
a means of leverage when breaking the screws loose (refer to Fig. 28).
542
