TM 5-3895-346-14
FUEL INJECTOR
ENGINE OVERHAUL
Figure 40. Tightening Injector Nut by
Hand
Figure 38. Injector Plunger, Follower and
Relative Location of Parts
Figure 41. Tightening Injector Nut
With Torque Wrench and
Tool J 4983-01
Figure 39. Comparison of Former and New
Design Injector Parts
Check Spray Tip Concentricity
To assure correct alignment, check the concentricity of the spray tip as follows:
1. Place the injector in the concentricity gage J 5119 as shown in Fig. 43 and adjust the dial indicator to zero.
236
