(5) Brake pedals. The brake pedals (6, fig. 1) are located at each side of the operator's platform. The brake
pedals are the lockable ratchet type and can be used during operation and for parking.
(6) Operator's seat. The operator's seat (8, fig. 1) can be mounted on the seat posts (5) on either side of the
roller. The seat has four height adjustments.
(7) Lifting hooks. The lifting hooks (2, fig. 1) are mounted on the left and right sides in the front and rear of the
roller. They are used for lifting, loading, and unloading purposes.
(8) Steering yoke. The steering yoke (8, fig. 2) is made of a heavy steel casting. The yoke supports the
stationary front axle on which the steering roll (11) is mounted.
1
Compression roll cover
10
Steering roll scraper
2
Fire extinguisher
11
Steering roll
3
Clutch lever
12
Steering axle bracket
4
Operator's seat
13
Steering roll axle cap
5
Lifting hook
14
Cranking shaft
6
Carbine rack
15
Identification plates
7
Steering yoke kingpin
16
Side door
8
Steering yoke
17
Gear cover
9
Scraper shaft
18
Grease pipe
Figure 2. Road roller, left rear view.
6