(1) Steering roll. The steering roll (15, fig. 1) consists of two separate compression rolls mounted on a single
axle (16). The steering roll is hydraulically operated and controlled by the steering lever (7) on the operator's
platform.
(2) Compression roll. The compression roll (12, fig. 1) consists of a single welded roll mounted on a single axle
(13). The compression roll can be inspected and cleaned by opening the compression roll door (10).
1
Steering yoke
9
Compression roll cover
2
Lifting hook
10
Compression roll door
8
Carbine rack
11
Towing bracket
4
Clutch lever
12
Compression roll
5
Seat post
18
Compression roll axle
6
Brake pedal
14
Side door
7
Steering lever
15
Steering roll
8
Operator's seat
16
Steering roll axle
Figure 1. Road roller, right front view.
(3) Clutch levers. The forward and reverse clutch levers (4, fig. 1) are located at each side of the operator's
platform. Either lever controls the forward or reverse movement of the roller.
(4) Steering lever. The steering lever (7, fig. 1), is located in the center of the operator's platform. The steering
lever (7) controls the steering roll (15) hydraulically.
5