TM 5-3895-379-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE - CONTINUED
3. Engine is Sluggish - Continued.
3. Remove strainer and visually
a. If fuel tank is empty, fuel level
inspect fuel in fuel tank.
gauge does not operate. Install
strainer and fill fuel tank with
supervisor.
b. If fuel is contaminated with
dirt, drain fuel tank and fill
Notify supervisor.
c. If fuel tank contains clean fuel,
install strainer, fuel cap
assembly and padlock and go
to Step 4.
4. Open right- and/or left-side
a. Open fuel/water separator(s)
drain valve(s) and drain
b. If engine is still sluggish, go to
Step 5.
c. If engine is no longer sluggish,
close left-side door assembly
0010 00-12