TM 5-3895-379-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE - CONTINUED
2. Engine Starts But Will Not Keep Running -
Continued.
WARNING
DO NOT perform fuel system checks, inspections or main-
tenance while smoking or near fire, flames or sparks. Fuel
may ignite, causing injury, death or damage to roller.
Wear fuel-resistant gloves when handling fuels and
promptly wash exposed skin and change fuel-soaked cloth-
ing.
NOTE
Use a container to catch any fuel that may drain from sys-
tem. Dispose of fuel IAW local policy and ordinances.
Ensure that all spills are cleaned up.
a. If fuel cap assembly vent is
2. Remove padlock, fuel cap
restricted, remove restriction.
assembly and strainer and
visually inspect vent for
damage or restriction.
b. If fuel cap assembly or vent is
damaged, notify supervisor.
c. If fuel cap assembly is not
damaged or restricted, go to
Step 3.
STRAINER
VENT
REMOVE
FUEL CAP
ASSEMBLY
FUEL TANK
INSTALL
PADLOCK
401-083
0010 00-7