TM 5-3895-383-24
25.
Install O-ring seal (20) and back-up ring (21) on both
plugs (15).
26.
Install O-ring seal (19) in end cover (10).
27.
Install bearing (14) and bushing (17) in the end cover.
28.
Install relief valve (16), spring (18) and plug (15) in both
sides of end cover (10).
29.
Use an allen wrench to install control orifice (12) in the
end cover.
30.
Install the O-ring seal on plug (13) and install the plug in
end cover (10).
31.
Position end cover (10) on housing (11), and install four
bolts (9).
32.
Install the key in shaft (8). Install shaft (8) on the shaft.
14-38