TM 5-3895-383-24
2-10. NATO RECEPTACLE REPLACEMENT (CONT)
NOTE
Tag and mark all wires prior to removal.
(6)
Slide cable cover (19) back and away from positive (+) terminal (20).
(7)
Remove two screws (21), lock washers (22), and two cables (23 and 24) from NATO receptacle (25). Discard lock washers.
(8)
Remove cap (26) from NATO receptacle (25).
(9)
Remove four locknuts (27), screws (28), and one rope clamp (29) and NATO receptacle (24) from frame assembly (6).
Discard locknuts.
b. Installation.
NOTE
If not using Caterpillar screws (see TM 5-3895-383-24P) in step (2), thread locking compound
must be applied. If using Caterpillar screws, skip step (1).
(1)
Apply thread locking compound to screws (28).
(2)
Install NATO receptacle (25)(+ side to right) and rope clamp (29) on frame assembly (6) with four screws (28), and locknuts
(27).
(3)
Install cap (26) on NATO receptacle (25).
(4)
Install two cables (23 and 24) on NATO receptacle (25) with two lock washers (22) and screws (21).
(5)
Slide cable cover (19) over pos itive (+) terminal (20).
2-28
