TM 5-3895-383-24
(10)
From beside Roller, slide cable cover (30) back and away from positive (+) terminal (31).
NOTE
Depending upon installation, other cables may need to be removed from starter.
(11)
Remove nut (32) and positive cable (23) from starter assembly (33).
(12)
Remove boot (34), nut (35), and negative cable (24) from negative (-) terminal (36).
(13)
Remove cables (23) and (24) from Roller.
b. Installation.
(1)
From under Roller, feed positive cable (23) and negative cable (24) up to starter assembly (33).
(2)
From beside Roller, install positive cable (23) on starter assembly (33) with nut (32). Tighten nut.
(3)
Slide cable cover (30) over positive (+) terminal (31).
(4)
Install negative cable (24) on negative (-) terminal (36) with nut (35). Tighten nut.
(5)
Install boot (34) on negative (-) terminal (37).
2-33