TM 5-3895-383-24
2-9. LIGHT GUARD REPLACEMENT
This Task Covers:
a. Removal
b. Installation
INITIAL SETUP
Tool, and Special Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
Engine OFF (TM 5-3895-383-10)
(SC 5180-90-N26), Tool Number W33004,
Drum and wheels chocked
NSN 5180-00-177-7033
Wrench, Torque (0-175 lb-ft), NSN 5120-00-640-6364,
(Included in T13152 and W32593)
a. Removal.
NOTE
This
paragraph
discusses
the
replacement of one light guard. All four
light guards are replaced in the same
way.
(1)
Remove two nuts (1), washers (2), bolts (3), washers
(2) and guard assembly (4) from ROPS (5).
NOTE
Trim channel is used only on front light
guards.
(2)
Remove trim channel (6) from guard assembly (4).
b. Installation.
NOTE
Trim channel is used only on front light
guards.
(1)
Install trim channel (6) on guard assembly (4).
(2)
Install guard assembly (4) on ROPS (5) with two bolts
(3), four washers (2), and two nuts (1). Tighten nuts
to 40 lb-ft (55 N m).
NOTE
Follow-on Maintenance: Remove chocks.
END OF TASK
2-25
