TM 5-3895-383-10
Operation Section
4-28
Machine Controls
Vibration Control
SMCS Code: 1408
Illustration 36
In order to increase the frequency of the drum
vibration, rotate the knob clockwise. In order to reduce
the frequency of the drum vibration, rotate the knob
counterclockwise. The drum vibration can be varied
from 1400 to 1965 vibrations per minute (VPM).
Steering Wheel
SMCS Code: 4309; 4343
Illustration 37
The steering wheel controls the directional steering of
the machine. The machine will turn in the same
direction as the steering wheel is turned.
Raise the steering frame lock pin. Lock the pin into the
RAISED position. This will allow you to steer the
machine.
LEFT TURN - Move the steering wheel
counterclockwise in order to steer the
machine to the left. Turn the steering
wheel farther in order to achieve a more acute turn.
RIGHT TURN - Move the steering
wheel clockwise in order to steer the
machine to the right. Turn the steering
wheel farther in order to achieve a more acute turn.
