TM 5-3895-383-10Operation Section 4-29 Machine ControlsSteering Wheel Tilt ControlSMCS Code: 4310; 4338Illustration 38In order to tilt the steering wheel, pull up on the lever.Hold the lever up, and adjust the steering wheel to thedesired position. In order to lock the steering wheel inplace, release the lever.Leveling Blade ControlSMCS Code: 5063Illustration 39The control for the leveling blade (1) is used to adjustthe height of the leveling blade.FLOAT (2) - Push the lift lever forward intothe float detent. The leveling blade willadjust to the contour of the ground whenthe lift lever is in the FLOAT position.The lift lever will remain in the FLOAT position until thelift lever is manually pulled out of the float detent. Thelift lever will then return to the HOLD position.LOWER (3) - Push the lift lever forward inorder to lower the leveling blade. The liftlever will return to the HOLD position whenyou release the lift lever. The leveling blade will remainin the selected position.HOLD (4) - When you release the lift leverfrom the RAISE position or from theLOWER position, the lift lever will return tothe HOLD position.RAISE (5) - Pull back the lift lever in orderto raise the leveling blade. The lift lever willreturn to the HOLD position when yourelease the lift lever. The leveling blade will remain inthe selected position.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
