TM 5-3895-383-10
Operation Section
4-23
Monitoring Systems Features
Horn
SMCS Code: 7402
Illustration 24
Horn - Push the horn switch in order to
sound the horn. Use the horn to alert
personnel or signal personnel.
Seat Belt Adjustment
Illustration 29
The seat belt is retractable. In order to secure the belt
in the buckle, pull the belt until there is enough length
in order to latch the belt into the buckle. In order to
release the belt, push the button on the top of the
buckle.
Backup Alarm
SMCS Code: 7406
Illustration 25
Backup Alarm - The backup alarm will sound when
the propel lever is in the REVERSE position. The
backup alarm alerts any personnel that the machine is
backing up.
The backup alarm is on the rear of the machine.
Illustration 26
A three-position adjustment knob on the back of the
backup alarm regulates the volume level of the backup
alarm. The alarm settings are HIGH, LOW, and
MEDIUM.
The three-position adjustment knob is set to the HIGH
setting when the machine is shipped from the factory.
The three-position adjustment knob should remain at
the HIGH setting unless the job site requires a lower
volume level.
