TM 5-3895-382-24
Electrical Displacement Control (EDC) /Servo Piston
(6) Electrical Displacement Control (EDC) Unit.
(7) Tighten EDC neutral adjustment locknut
to a torque of ...................................................14 to 24 Nm
(10 to 18 lb-ft)
(8) Tighten servo piston neutral adjustment locknut
to a torque of ...................................................28 to 51 Nm
(21 to 36 lb-ft)
(9) Servo control piston.
(10)
Tighten servo gage test port
to torque of ......................................................27 to 47 Nm
(20 to 25 lb-ft)
(11)
Tighten feedback linkage pivot screw
to torque of ........................................................8 to 15 Nm
(6 to 11 lb-ft)
(12)
Tighten control spool bore plug
to torque of ......................................................41 to 94 Nm
(30 to 70 lb-ft)
(13)
Pressure Control Pilot (PCP) valve.
12-6