TM 5-3895-382-24
Specifications
Pump Servo
(1) Tighten locknut to a torque of .............................24 to 37 Nm
(18 to 27 lb-ft)
(2) Tighten ten bolts to a torque of ..........................14 to 18 Nm
(10 to 13 lb-ft)
(3) Tighten locknut to a torque of .............................18 to 24 Nm
(13 to 18 lb-ft)
Electrical Displacement Control (EDC)
(4) Pressure Control Pilot (PCP)
NOTE:
The PCP cover is filled with silicone oil.
Coil (inside PCP cover)
Maximum continuos voltage:
High amplitude coil ............................................... 6.8 Vdc
Low amplitude coil ............................................... 6.1 Vdc
Current in neutral .......................................................46±9 ma
Current at full stroke .............................................. 130±18 ma
Resistance at 24C (76F):
High amplitude coil ..........................................19.5 ohms
Low amplitude ..................................................15.5 ohms
(5) Tighten neutral adjust screw locknut
to torque of ........................................................2.8 to 3.4 Nm
(25 to 30 lb-in)
12-4
