TM 5-3895-382-24
1.
Inspect the condition of the fan pulley. Replace the fan
pulley, if necessary.
2.
Install extension (3) behind the fan.
3.
Install fan (2).
4.
Install four bolts (1). Tighten the bolts to a torque of 22
N.m (16 lb-ft).
Fan Drive - Remove
SMCS Code: 1359-011
Removal Procedure
Start By:
a.
Remove the fan. Refer to Disassembly and
Assembly, "Fan - Remove and Install".
Illustration 232
1.
Remove the four bolts for fan drive housing (1).
2.
Remove the fan drive.
Fan Drive - Install
SMCS Code: 1359-012
Installation Procedure
Table 41
Required Tools
Part
Tool
Number
Part Description
Qty
A
1P-0510
Driver Group
1
Illustration 233
1.
Install the fan drive.
2.
Use Tool (A) to install fan drive housing (1).
3.
Install the four bolts. Tighten the bolts to a torque of 44
N.m (32 Ib-ft).
End By:
a.
Install the fan. Refer to Disassembly and Assembly,
"Fan -Remove and Install".
Alternator -Remove & Install
SMCS Code: 1405-010
Removal Procedure
1.
Place an index mark on all of the electrical wires that
are connected to the alternator. Disconnect the
electrical wires from the alternator.
Illustration 234
Typical example.
7-90
