TM 5-3895-379-23
DRUM ASSEMBLY REPAIR - CONTINUED
0209 00
ECCENTRIC ASSEMBLY - CONTINUED
9.
Install four bolts (40), washers (41), cover (42) and tapered bearing (43) to housing (38).
10.
Install lifting brackets on housing (38). Attach a lifting device to lifting brackets and move housing (38) to transmission
stand.
11.
Install oil seal (54) and sleeve (55) to housing (38).
12.
Install six bolts (50), washers (51) two new O-rings (53) and two pipes (52) to housing (38). Tighten bolts to a torque of
15 + 4 lb-ft (20 + 5 Nm).
NOTE
Apply retaining compound to six bolts.
13.
Use lifting device to position weight assembly (49) on housing (38).
14.
Install jam nuts (46), locks (47), and nuts (48) to eight bolts (49) and bend tabs on locks (45) into position.
NOTE
Apply retaining compound to four bolts.
15.
Install four bolts (40), washers (41), cover (42) and tapered bearing (43) to housing (32). Tighten bolts to a torque of 15
+ 4 lb-ft (20 + 5 Nm).
16.
Install new O-ring (39) to housing (38).
17.
Install suitable link brackets on housing (32). Attach a lifting device and install housing (32) to housing (38).
18.
Remove link bracket from eccentric assembly (25).
19.
Install three bolts (36) and washers (37) to housing (32) and (38). Tighten three bolts to a torque of 15 + 4 lb-ft (20
+ 5 Nm).
20.
Install link bracket on eccentric assembly (25). Attach a lifting strap and lifting device to link bracket and install housing
(32), with eccentric assembly (25), to drum assembly (6).
0209 00-12
