TM 5-3895-379-23
DRUM ASSEMBLY REPAIR - CONTINUED
0209 00
ECCENTRIC DISASSEMBLY - CONTINUED
5.
Remove O-ring (39) from housing (38). Discard O-ring.
6.
Remove four bolts (40), washers (41), cover (42) and tapered bearing (43) from housing (32).
7.
Bend tabs on locks (44) downward and remove jam nuts (45), locks (46), and nuts (47) that hold eight bolts (48).
8.
Install positioning bolts to weight assembly (49) and use lifting device to position weight assembly (49) on transmission
stand.
9.
Remove six bolts (50), washers (51) and two pipes (52) from housing (38). Remove two O-rings (53) from two pipes.
Discard O-ring.
10.
Remove oil seal (54) and sleeve (55) from housing (38).
11.
Install lifting brackets on housing (38). Attach a lifting device to lifting brackets and remove housing (38) from trans-
mission stand.
12.
Remove four bolts (40), washers (41), cover (42) and tapered bearing (43) from housing (38).
0209 00-8
