TM 5-3895-379-23
DRUM ASSEMBLY REPAIR - CONTINUED
0209 00
DRUM ASSEMBLY - CONTINUED
4.
Install remaining fourteen of sixteen new locknuts (30) and eight locks (31) to housing (32). Bend tabs (28) into position
on eight locks (29). Tighten nuts to 276 27 lb-ft (374 37 Nm).
5.
Install six bolts (26) and plate (27) to eccentric assembly (25).
6.
Install wheel clamp (23) and key (24) to eccentric assembly (25).
7.
Install nut (21) and washer (22) to wheel clamp (23).
NOTE
Apply sealing compound to four bolts and nine nuts.
8.
Install four bolts (18), washers (19) and drive shaft (20).
9.
Install nine nuts (15), washers (16) and plate (17) to drum assembly (6).
0209 00-16
