TM 5-3895-379-23
DRUM ASSEMBLY REPAIR - CONTINUED
0209 00
ECCENTRIC DISASSEMBLY - CONTINUED
NOTE
Place alignment marks on weight assembly components for assembly.
13.
Remove lifting brackets from weight assembly (49) and remove four bolts (56), eight nuts (57), four tabs (58) and shaft
(59) from counter weight (60).
14.
Remove weight (61) from counter weight (60).
15.
Remove counter weight (60) from shaft (62). Remove six bolts (63) and washers (64) that fasten thrust block (65) to
shaft (62).
16.
Use three forcing screws to remove thrust block (65) from shaft (62).
17.
Remove, as a unit, spur (66), spring (67), shaft (68), drive key (69) and pin (70) from shaft (62).
18.
Remove spring (67) from shaft (68).
19.
Remove oil ring (71), ring (72) and sleeve (73) from shaft (62).
20.
Remove pin (70) and drive key (69) from shaft (62).
49
58
57
71,72
70
57
65
60
64 63
61
69
59
56
68
73
67
66
62
401-2052
0209 00-10
