TM 5-3895-379-23
VIBRATORY MOTOR REPLACEMENT - CONTINUED
0206 00
REMOVAL - CONTINUED
4.
Pull vibratory motor (5) from drum (9).
5.
Remove four bolts (10) and washers (11) from plate (12), that fasten vibratory motor (5) to driveshaft.
6.
With assistance, remove vibratory motor (5) from roller.
5
12
11
401-2045
10
INSPECTION
1.
Inspect all parts and hoses for damage and wear. Replace worn or damaged parts.
2.
Ensure vibration motor and accessories are clean, dry and free of all dirt and foreign material.
INSTALLATION
1.
With assistance, position vibratory motor (5) to drum (9) and install to driveshaft.
2.
Install four washers (11) and bolts (10) through plate (12) to fasten vibration motor (5).
3.
Install four washers (7) and nuts (6) on plate (8).
NOTE
Remove all caps and plugs from hoses and openings prior to assembly.
4.
Connect two hose assemblies (3) and two hose assemblies (4) to vibratory motor (5).
5.
Connect electrical connector (2) and install new cable tie (1).
6.
Fill hydraulic tank (WP 0008 00 and WP 0009 00).
7.
Close left-side door assembly (TM 5-3895-379-10).
8.
Battery switch to ON position (TM 5-3895-379-10).
9.
Operate roller and check for proper operation and leaks (TM 5-3895-379-10).
END OF WORK PACKAGE
0206 00-3/(0206 00-4 Blank)
