TM 5-3895-379-23
PROPEL AND VIBRATORY VALVE TESTS AND ADJUSTMENTS - CONTINUED
0184 00
DAMPED CONTROL HEAD ADJUSTMENT
NOTE
Time rear drum for 10 revolutions in forward direction.
9.
Move propel control lever forward (TM 5-3895-379-10) until pressure is at 175 psi (1200 kPa).
NOTE
Time rear drum for 10 revolutions in reverse direction.
10.
Move propel control lever rearward (TM 5-3895-379-10) until pressure is at 175 psi (1200 kPa).
NOTE
If times vary more than 10 percent, more adjustment is necessary.
11.
Compare times recorded in steps 10 and 11.
NOTE
To decrease the reverse drum speed in relation to forward drum speed, screw dampen adjuster clock-
wise. To increase the reverse drum speed in relation to forward drum speed, turn dampen adjuster (36)
counterclockwise.
12.
Adjust damped adjustment screw (36) as necessary until the speed variation between forward and reverse is less than ten
percent.
36
35
401-2152
END OF WORK PACKAGE
0184 00-9/(0184 00-10 Blank)
