TM 5-3895-379-23
FUEL/HYDRAULIC OIL TANK AND DRAIN LINES REPLACEMENT
THIS WORK PACKAGE COVERS
Drain Lines Removal, Installation
Cleaning and Inspection
Tank Removal, Installation
INITIAL SETUP
Materials/Parts - Continued
Tools and Special Tools
Packing, preformed (18)
Tool kit, general mechanic's (Item 36, WP 0220 00)
Washer (2)
Shop equipment, common no. 1 (Item 28, WP 0220
References
Block, wooden, 6x6x18 in. (15x15x45 cm) (2)
Materials/Parts
TM 5-3895-379-23P, Figures 27, 28, 29, 30, 52, 91
and 128
Compound, cleaning, solvent (Item 9, WP 0219 00)
Personnel Required
Cloth, cleaning (Item 10, WP 0219 00)
Three
Compound, sealing (Item 12, WP 0219 00)
Equipment Condition
Gasket, cement (Item 18, WP 0219 00)
Engine off (TM 5-3895-379-10)
Strap, tiedown (Item 36, WP 0219 00)
Fuel/hydraulic oil tank drained (WP 0037 00)
Tag, marker (Item 37, WP 0219 00)
Operator platform assembly raised (WP 0128 00)
Lifting device, minimum capacity 360 lb (163 kg)
Fuel level sending unit removed (WP 0096 00)
Locknut (2)
Air cleaner assembly removed (WP 0032 00)
O-ring (10)
WARNING
DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Fuel may ignite, causing damage to machine and injury or death to personnel.
Fuel and hydraulic oil are very slippery. Immediately wipe up any spills. Failure to follow this warning
may cause injury.
NOTE
The CB534B and CB534C Rollers fuel/hydraulic oil tanks and drain lines are replaced the same way,
except where noted.
Tag and mark all fuel and hydraulic hoses prior to removal.
Place container under hose assemblies to catch any fuel and hydraulic oil that may drain from tank. Dis-
pose of fuel and oil IAW local policy and ordinances.
