TM 5-3895-379-23
WATER SPRAY PUMP REPLACEMENT - CONTINUED
0155 00
INSTALLATION
1.
Install clamp half (14), water spray pump (10), clamp half (14), plate (13) and two screws (12) on bumper assembly
(15). Tighten screws securely.
2.
Position two hose assemblies (9) on elbows (8) and tighten two clamps (11).
3.
Install two elbows (8) and hose assemblies (9) on water spray pump (10).
NOTE
Add cable ties as required.
4.
Connect water spray pump connector (6) to connector (7).
5.
Turn valve handle (5) to open position and check for leaks.
WARNING
Use caution when installing cover on bumper assembly. Failure to follow this warning may cause injury.
6.
Install cover (3) on bumper assembly (4) with four
washers (2) and bolts (1). Tighten screws to 15-25
lb-ft (20-34 Nm).
4
3
2
1
401-763
7.
Start engine, operate water spray system (TM 5-3895-379-10) and check for leaks.
8.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0155 00-3/(0155 00-4 Blank)
