TM 5-3895-379-23
WATER TANK REPLACEMENT - CONTINUED
0154 00
REMOVAL - CONTINUED
7.
Remove elbow (7) from water tank (14).
NOTE
Nut and fitting have left-hand thread.
8.
If damaged, remove nut (16), seal (17) and fitting
18
(18) from water tank (14).
14
17
7
16
401-775
9.
If damaged, remove two bolts (19), washers (20)
and straps (15) from bumper assembly (4).
19
20
4
401-776
INSTALLATION
NOTE
If installing water tank for wiring harness or front or rear support replacement, perform only steps 4 and
5 and steps 9 and 10.
1.
If removed, install straps (15) on bumper assembly (4) with two washers (20) and bolts (19). Tighten bolts to 22-30
lb-ft (30-41 Nm).
NOTE
Nut and fitting have left-hand thread.
2.
Install fitting (18), seal (17) and nut (16) in water tank (14). Tighten nut securely.
3.
Install elbow (7) on water tank (14).
0154 00-3
