TM 5-3895-379-23
FRONT AND REAR PROPEL GEARBOX SERVICE - CONTINUED
0116 00
FILL
1.
Start engine (TM 5-3895-379-10).
2.
Move roller (1) until the opening for oil level check plug (2) and fill plug (3) are located at 9 and 12 o'clock positions.
3.
Turn engine off (TM 5-3895-379-10).
4.
Remove fill plug (3) at 12 o'clock position from the gearbox (4) through access hole.
WARNING
Oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may cause injury.
CAUTION
Do not overfill gearbox or damage to equipment may result.
5.
Add oil (WP 0008 00 and WP 0009 00) until oil level
is at bottom of opening for the oil level check plug
1
3
4
2
opening.
6.
Install fill plug (3) through access hole in gearbox (4).
7.
Start engine (TM 5-3895-379-10).
8.
Move roller (1) until opening for the oil level check
plug (2) is at 12 o'clock position and fill plug (3) is at
3 o'clock position.
9.
Turn engine off (TM 5-3895-379-10).
10.
Install oil level check plug (2) through access hole in
gearbox (4).
401-618
11.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0116 00-4
