TM 5-3895-379-23
REAR CHASSIS WIRING HARNESS REPLACEMENT
THIS WORK PACKAGE COVERS
Inspection and Testing, Removal, Installation
INITIAL SETUP
References
Tools and Special Tools
Tool kit, general mechanic's (Item 36, WP 0220 00)
Materials/Parts
Instructions
Strap, tiedown (Item 36, WP 0219 00)
TM 5-3895-379-23P, Figure 60
Tag, marker (Item 37, WP 0219 00)
Equipment Condition
Right and left-side door assemblies opened (TM 5-
3895-379-10)
Rear water tank removed (WP 0154 00)
Battery cables disconnected (WP 0105 00)
INSPECTION AND TESTING
Wiring and electrical inspection and repair is presented in General Wiring Repair (WP 0108 00). Electrical testing is
presented in Electrical General Maintenance Instructions (WP 0213 00).
REMOVAL
NOTE
Remove cable ties as required.
Tag and mark all wires prior to removal.
Tag and mark general position of wiring harness in chassis as components are removed. Harness will
need to be repositioned at start of installation.
1.
Remove nut (1), washer (2) and two wires (3) from frame assembly (4).
2.
Disconnect rear wire harness connector (5) from connector (6).
6
5
1
2
3
4
401-589
