TM 5-3895-379-23
ENGINE WIRING HARNESS REPLACEMENT - CONTINUED
0109 00
INSTALLATION
NOTE
Install cable ties as required.
1.
Position loose wiring harness in general installation position.
2.
Install cable (80) on starter (76) with new lockwasher (79) and screw (78). Close cover (77).
3.
Install cable (73) on starter (76) with new lockwasher (75) and nut (74). Position boot (72) to cover cable end.
78
79
80
75
74
73
76
72
77
401-571
4.
Connect engine wiring harness clip (70) to starting aid (71).
71
70
401-570
0109 00-10
