TM 5-3895-379-23
ENGINE WIRING HARNESS REPLACEMENT - CONTINUED
0109 00
REMOVAL - CONTINUED
21.
Position boot (56) so that end of cable (57) can be seen
50
57
61
and remove two nuts (58), washers (59) and two
cables (57) and (60) from starter relay switch assem-
bly (61).
59
58
59
56
58
401-567
22.
Loosen two screws (62) and remove two wires (63)
64
from hydraulic temperature sensor (64).
62
62
63
63
401-568
23.
Remove two nuts (65), lockwashers (66), washers (67) and wires (68) from fuel level sending unit (69). Discard lock-
washers.
65
65
66
66
67
67
68
68
69
401-569
0109 00-8
