TM 5-3895-379-23
ENGINE WIRING HARNESS REPLACEMENT - CONTINUED
0109 00
INSTALLATION - CONTINUED
16.
Install wire (34) on B+ terminal (35) of alternator (31) with washer (33) and nut (32). Tighten nut to 5-6 lb-ft (7-8.
Nm).
17.
Install wire (29) on D+ terminal (30) of alternator (31) with washer (28) and nut (27). Tighten nut to 1-1.4 lb-ft
(1.35-1.9 Nm).
29 30
28
27
34
33
32
35
31
401-560
18.
Connect engine wiring harness connector (25) to water temperature sensor connector (26).
25
26
401-559
0109 00-15
