TM 5-3895-379-23
ENGINE WIRING HARNESS REPLACEMENT - CONTINUED
0109 00
REMOVAL
NOTE
Tag and mark all wires prior to
removal.
Cut cable ties as needed for removal.
1.
Disconnect engine wiring harness connector (1) from
connector (2).
2.
If damaged, remove nut (3), bracket (4), washer (5)
and screw (6) from frame assembly (7).
3.
Loosen screw (8) in connector (9) and disconnect con-
nector (9) from engine wiring harness connector (10).
4.
Remove three screws (11), lockwashers (12) and
engine wiring harness connector (10) from frame
assembly (7). Discard lockwashers.
3
10
12
11
1
9
4
7
8
6
5
2
401-555
5.
Disconnect engine wiring harness connector (13) from
low charge pressure switch connector (14).
13
14
401-556
0109 00-2
