TM 5-3895-379-23
GENERAL WIRING REPAIR - CONTINUED
0108 00
GROUP I TERMINAL DISASSEMBLY
WARNING
Use caution when using removal tool. Tip of tool is very sharp. Failure to follow this warning may cause
injury.
NOTE
REMOVAL TOOL
Locking tab on the terminal mates
24
with molded tab in plastic connector
to retain cable assembly.
23
All Group I connectors are repaired
the same way. Number of wires in
connection may vary.
1.
Insert tip of removal tool between locking tab (23)
of terminal (24) and wall of connector (25).
2.
Release locking tab (23) from connector (25).
25
3.
Push terminal (24) through front of connector (25).
401-545
NOTE
Perform step only if old terminal is still attached to wire.
Make cut directly behind damaged terminal.
4.
Cut and remove terminal (24) from wire (26). Dis-
24
card terminal.
5.
Remove wire (26) and seal (27) from connector
26
(25).
25
27
401-546
0108 00-6
