TM 5-3895-379-23
BATTERY INSPECTION AND SERVICE- CONTINUED
0103 00
REMOVAL
4.
Remove four locknuts (20), washers (21), screws (22), washers (23) and two holder assemblies (24) from frame assem-
bly (25). Discard locknuts.
22
5
23
6
WARNING
Use caution when handling heavy parts.
Provide adequate support and use assis-
tance during procedure. Failure to follow
this warning may cause injury.
5.
With assistance, remove two batteries (5) and (6) from
frame assembly (25).
21
24
25
20
401-526
INSTALLATION
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure. Fail-
ure to follow this warning may cause injury.
CAUTION
Install battery and/or positive (+) battery cable completely before connecting the negative (-) battery cable.
Failure to do so can result in damage to electrical system.
1.
With assistance, position two batteries (5) and (6) in frame assembly (25).
CAUTION
Do not overtighten screw and nut. Damage to battery may result.
2.
Position two holder assemblies (24) on batteries (5) and (6).
3.
Install holder assemblies (24) on frame assembly (25) with two washers (23), screws (22), washers (21) and new lock-
nuts (20).
4.
Install cable (19) on positive (+) terminal (9) of battery (5) and negative (-) terminal (10) of battery (6) with nuts (17)
and (18).
5.
Install cable (16) on positive (+) terminal (4) of battery (6) with nut (15). Tighten nut securely.
6.
Install cable (14) on negative (-) terminal (3) of battery (5) with nut (13). Tighten nut securely.
7.
Lower operator platform assembly (WP 0128 00).
END OF WORK PACKAGE
0103 00-3/(0103 00-4 Blank)