TM 5-3895-379-23
BATTERY DISCONNECT SWITCH REPLACEMENT - CONTINUED
0104 00
INSTALLATION
NOTE
Use alignment pin on battery disconnect switch to ensure proper placement of switch and plate.
1.
Install battery disconnect switch (9), new lockwasher (11) and plate (12) on frame assembly (13) with new lockwasher
(11) and nut (10).
2.
Install two cables (6) on battery disconnect switch (9) with two new lockwashers (8) and nuts (7).
3.
Position boot (5) over cable (6).
4.
Install cable (2) on negative (-) terminal (3) of battery (4) with nut (1).
5.
Lower operator platform assembly (WP 0128 00).
END OF WORK PACKAGE
0104 00-3/(0104 00-4 Blank)
