TM 5-3895-379-23
FUEL LEVEL SENDING UNIT REPLACEMENT - CONTINUED
0096 00
REMOVAL
NOTE
Use a container to catch any fuel that may drain from system. Dispose of fuel IAW local policy and
ordinances. Ensure all spills are cleaned up.
Tag and mark all wires prior to removal.
1.
Remove two nuts (1), lockwashers (2), washers (3)
6
and wires (4) from fuel level sending unit (5). Discard
1
lockwashers.
2
2.
Remove five screws (6), lockwashers (7), fuel level
7
sending unit (5) and gasket (8) from fuel tank (9). Dis-
3
card gasket and lockwashers.
INSTALLATION
5
4
NOTE
8
9
Fuel level sending unit must be installed
so that outside electrical stud is on left-
side of roller.
1.
Install new gasket (8) and fuel level sending unit (5)
on fuel tank (9) with five new lockwashers (7) and
screws (6).
2.
Install two wires (4) on fuel level sending unit (5) with
two washers (3), new lockwashers (2) and nuts (1).
401-507
3.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0096 00-2
