TM 5-3895-379-23
HYDRAULIC OIL TEMPERATURE SENSOR REPLACEMENT - CONTINUED
0098 00
REMOVAL
NOTE
Tag and mark all wires prior to removal.
1.
Loosen two screws (1) on hydraulic oil temperature
sensor (2) and remove two wires (3).
NOTE
Use container to catch any hydraulic oil
that may drain from system. Dispose of oil
IAW local policy and ordinances. Ensure
all spills are cleaned up.
2.
Remove hydraulic oil temperature sensor (2) from
hydraulic oil tank fitting (4).
INSTALLATION
1.
Apply sealing compound to threads of hydraulic oil
temperature sensor (2) and install in hydraulic oil tank
4
fitting (4). Tighten sensor to 26-33 lb-ft (35-45 Nm).
2.
Position two wires (3) on hydraulic oil temperature
sensor (2) and tighten two screws (1).
2
1
3
1
3
401-512
3.
Fill hydraulic tank (WP 0037 00).
4.
Close right-side door assembly (TM 5-3895-379-10).
5.
Start engine and check for leaks (TM 5-3895-379-10).
6.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0098 00-2
