TM 5-3895-379-23
WORK LIGHT BULB REPLACEMENT - CONTINUED
0092 00
REMOVAL - CONTINUED
5
6
2.
Pinch lockwires together and remove from notches in
lens assembly (3).
3.
Remove bulb (5) from lens assembly (3).
NOTE
Tag and mark all wires prior to removal.
NOTCHES
4.
Disconnect bulb (5) from connector (6).
5.
If damaged, disconnect lens assembly (3) from con-
nector (7).
7
3
LOCKWIRES
401-501
INSTALLATION
1.
If removed, connect lens assembly (3) to connector (7).
2.
Connect bulb (5) to connector (6).
3.
Install bulb (5) in lens assembly (3).
4.
Position lockwires over bulb (5), pinch together and position in notches in lens assembly.
5.
Install lens assembly (3) and bezel (2) in work light body assembly (4) with four screws (1). Tighten screws.
3
1
2
4
401-500
6.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0092 00-2